Lanner FW-7525 - Manual (Page 31)

North Bridge Chipset Configuration
It shows the memory information such as the total
detected memory and memory frequency.
South Bridge Chipset Configuration
Restore on AC Power Loss
This option lets you set the state of the system when it
has just recovered from a power outage.
Option Description
Power Off When setting to Power Off, the system goes into
“off state” after an AC power interruption.
Power On When setting to Power on, the system turns on
automatically after a power interruption
Auto When setting to Last State, the system goes
into whatever the state was before the power
interruption.
SATA Controllers Configuration
SATA Mode Selection
The system supports various SATA mode.
Item Selection
IDE Mode Set to IDE mode when your want to use the
Serial-ATA hard disk drives as Parallel ATA
physical storage devices.