Lanner LVC-5770 - Manual (Page 11)

11
System Components
Chapter 2
Embedded and Industrial Computing
Rear Components
Component Description Pin Definition Reference
R1 Power-In (DC) Power-in with ignition support. The
LVC-5770 support a wide range of
power input (+9V ~ +36) including
the prevalent 12V and 24V vehicular
power system. It has a 2KV ESD
protection on the DC input and
ignition line.
DC_IN Connector (CN4) on page
25
R2 DC Relay Bypass (DC) 9~36V, 10A (GND, Power-Out)
Integrated in 1x 4-pin terminal block
CN4 on page 21
R3 PoE Power 48V 48V power input for supplying power
to the PoE devices
CN3 on page 21
R4 Two USB 2.0 Ports USB type A connectors Dual USB Port Connector #4 and
#5 (USB3) on page 26
R5 Two 10/100/1000Mbps LAN
ports
Two RJ-45 (network) jacks (provided
by Intel 82574L) with LED indicators
as described below
LINK/ACT (Yellow)
On/Flashing: The port is linking •
and active in data transmission.
Off: The port is not linking.
•
SPEED (Green/Amber)
Amber: The connection speed is •
1000Mbps.
Green: The connection speed is
•
100Mbps
Off: .The connection speed is
•
10Mbps.
LANB1/LANB2 on page 25
R6 DVI-D (*) A DVI-D port (single link) which
is provided by Intel HD Graphic
Engine. This port can support up to
1920x1200@60Hz resolution.
DVID1 on page 24
R7 HDMI Port (*) A DVI-D port (single link) which
is provided by Intel GMA 3650
(resolution: 1920x1200@60Hz).
HDMI1 on page 24
R8 VGA Port (*) It connects an external VGA
monitor or projector (resolution:
2048x1536@75Hz)
VGA1 on page 24
R9 GPS Antenna It connects an antenna for the build-
in GPS module.
R10 Serial Ports COM1 and COM2 provide RS232/
RS422/RS485 communications with
a dip switch selecting among these
standards.
RS-232 COM Port (COM1, COM2)
on page20
R6
R3 R1
R7 R8
R2
R9
R10
R5 R4
R11
R12
USB LAN2 LAN1
DC Input 9~36V
OUT + - - + IN + -
DC Relay Bypass PoE Power 48V
COM2
COM1
POE POE POE POE Audio
R13
DVI-D HDMI VGA
LINK/ACT
SPEED