Jordan Valve Mark 16IQ Series – Smart Valve User Manual

Page 3

Richards Industries

Operation

• Going to Menu Mode from Automatic or Manual Mode

a. Press

for 5 seconds and the menu mode will display.

• Changing a menu item

a. Once you are at a menu item, use the

keys to select the

sub-menu value you desire.

b. Once the proper value is displayed, press the

key to enter and store

this value and move to the next menu item.

• Going back to Manual mode

a. Once you are finished optimizing the menu and the positioner has been re-

initialized, you exit the menu setting by pressing the

key for 5

seconds.

b. The display will change and you will be in manual operation. At this

point you can use the

keys to move the valve trim.

• Going to Automatic Mode

a. From the manual mode, simply press the

key momentarily to get

into automatic mode. Positioner will now respond to signal changes from
the system.

• Diagnostics

a. All diagnostic information can be accessed through the pushbuttons.

Simply press all three buttons

at the same time

for 2 seconds to get into diagnostics.

• Exiting Diagnostics

a. To exit diagnostics, simply press the

for 2 seconds to get back to

the last mode you were in.