Jordan Valve Mark 16IQ Series – Smart Valve - Manual (Page 2)

Richards Industries
2
Supply Pressure – Use clean, dry instrument air for the supply pressure.
• In general, on valves that are normally closed, you need 35-40 psi of supply
pressure to assure full operation.
• For valves that are normally open, 25 psi of supply pressure is generally the
most you would need to fully operate a valve of this action. You can damage
certain models by exceeding this recommendation.
• All Richards Industries linear actuators are rated for a maximum pressure of
50 psi. Please do not exceed this valve.
There are three keys on the positioner. Each one is described below:
- Enter Key – This key is used to move between menus and to accept changes to
the menu. It is also used to go between operating, manual, and menu modes.
- This key is used to move down in the sub-menu selections.
- This key is used to go up in the sub-menu selections.