JBL Synthesis SDP-45 4K - Manual (Page 62)

Specifications
JBL SYNTHESIS SDP-45
- 62 -
GENERAL
A/D Conversion 24-Bit, 192 kHz Delta-Sigma
D/A Conversion 24-Bit, up to 192 kHz Delta-Sigma
DSP Engine Dual TI DA710
Power Supply Separate off-line standby PSU & main linear
power supply with toroidal power transformer
HDMI INPUT & OUTPUT CONNECTORS AND PERFORMANCE
HDMI Inputs 8 HDMI Type A (19-pin) connectors
HDMI Output 2 x HDMI Type A (19-pin) Connectors
Video Resolutions Full support for HDMI v1.4 including 3D
pass-through and all mandatory video
resolutions
12 bit deep color and xvYCC (x.v.Color)
supported up to 1080p (225 MHz equivalent)
Full HDCP compliant
Audio Resolutions Up to 7.1 channels and up to 192kHz sample
rate at 24 bits bit depth
Internal Decoding of all HDMI 1.4 audio
formats including:
Dolby TrueHD, Dolby Digital Plus
DTS-HD Master Audio
MAIN ZONE AUDIO PERFORMANCE
Frequency Response 20 Hz to 20 kHz +/- 0.25 dB
Low Frequency Cutoff: 0.3 Hz (all speakers channels in Bypass
mode)
High Frequency Cutoff 180 kHz (all speakers in Bypass mode)
THD+Noise < 0 .006% in DSP modes; < 0.0025% in
Bypass mode 20Hz to 20kHz at maximum
output level
Signal-to-Noise Ratio 105dB in DSP Modes; 110dB in 2ch Bypass
Mode; 22 kHz bandwidth, Ref. 1 kHz at max.
output
Input Level 2 Vrms in DSP modes; 4 Vrms in Bypass
Mode
Input Impedance 50 kOhms for single-ended analog audio, 1K
Ohms for balanced analog inputs
Output Level 8 Vrms (16 Vrms Balanced) in DSP Modes;
10 Vrms (20 Vrms Balanced) in Bypass
Mode
Output Impedance 110 Ohms
Bass Management 2nd Order HP filter(x5), 4th Order LP filter 40
– 200 Hz Crossover Freq