iSys i24 Direct Imaging Printer User Manual

Page 14

i24 USERS GUIDE - 3.31.2005

Range:

0...999

NOTE:

Adjustments are in 1/16 of an inch increments.

Hyst.

Used to adjust image quality at higher speeds. This setting looks at the

history of each dot and decides through an algorithm the amount of energy needed.
Default “Off”.

Range: Off, 1...5 (darkest)

NOTE:

This setting can make the fill patterns look lighter or darker.

EOT Cut

Automatically cuts the media when an EOT command is received from

the host. This setting will advance the media past the cutter then cut the

media off.

Default “No”.

Setting: Yes or No

Pre-buff

Helps hosts with slower data transfer rates to plot using a faster speed

without the stop and start gaps. This setting uses the onboard memory to

buffer the incoming data before plotting the image. Default “Off”.

Setting: On or Off

NOTE:

Memory can be expanded up to 32 Meg.

Nib save

Helps nib life on vertical boarders that are always turned on.
Default “Auto”.

Settings:

Auto

(automatically shifts plot left and right)

Lock@1

(lock image in position)

Lock@2

Lock@3

Lock@4

Lock@5

Center

(center image)

NOTE:

Auto setting is recommended to help improve nib life. If the print head is
missing a nib the plot can be shifted and locked in place using the Lock@ setting.