iSys iTerra Lite Color Inkjet Printer - Manual (Page 30)

30
Installation of the Rack Input and Output Media Trays
RACK MOUNT INPUT TRAY INSTALLATION
Figure # Install 11
a) Installation of the Rack Mount Input and Output trays assumes that the printer has been
installed in a rack unit already as in figure ‘Install11’. Optional Rack Mount hardware for various
depth racks are available from iSys.
Figure # Install 12
Input Media Tray – Rack Mount
Part# KIT-PPR-IT8LR
Figure # Install 13
Output Media Tray – Rack Mount
Part# KIT-PPR-IT8LDR
b) Parts required for installation of the rack mount input media tray are found in figure ‘Install12’.
Figure # Install 14 Figure # Install 15
c) Taking the input media tray, insert the tabs located at the top side of the tray, into the two slots
located on the front of printer as in figures ‘Install14 & Install15’.