Ion Science Tiger Select - Manual (Page 11)

TIGER MANUAL Ion Science Ltd
Page 11 of 20
Unrivalled Detection. www.ionscience.com
Start up
A 15 minute STEL can then be carried out using the same tube, The STEL for Benzene will be automatically
selected from the gas table. If a Benzene STEL is not specified within the selected gas table a figure can be
entered on to the gas table and then sent to the instrument. To allow the table to be edited ‘Allow
inert/Delete’ must be selected from the drop down Menu found in the top of the gas table screen.
H&S function (STEL calculation)
The second stage of Tube mode is optional; to enable it select the H&S option on the configuration screen of
Tiger PC and then sent to the
instrument. (See below)
If selected a STEL calculation will
automatically start calculating after
the initial test.
The H&S icon will flash in the left
corner of the screen, if the STEL
measurement is required then the
ENTER key.
If the H&S stage is
not required then press the ‘Esc’ key, the instrument will offer the opportunity to fit
another Benzene pre-filter tube to carry out another test.