Hongdian H7921/H7920 Basic 3G/4G Router - Manual (Page 43)

H92x 3G/4G Router 7 FAQ
Version (2014-05-28) 7 -9
---END
5.2.3 Parameter select
Router parameter select function is used for multi-function switch, like VPN parameter
switch, SIM parameter switch, multi-sever switch .etc. You could pre-config several network
parameter and switch between them. This function also could switch VPN setting, for
example, when modem 1 online it connect VPN 1, modem2 online it connect VPN2, they
cannot connect at same time because conflict, by this function you could easily switch when
network failure.
Step 1 Login H792x WEB GUI.
Step 2 Single click “Network > parameter select”.
Figure 5-21 parameter select
Step 3 Add, modify, delete, enable and disable the parameter select rule.
 add