Hongdian H3201 1CH SD DVS - Manual (Page 45)

User Guide
Issue 01 (2010-08-10)
Hongdian Proprietary and Confidential
Copyright © Hongdian Corporation
21
Figure 3-22 I/O setting
3.8 Device management
“Device management” includes follow parts:
 PTZ Setup
 RS-485 Setup
 DTU Setup
 Storage Management
 Format the memory
3.8.1 PTZ Setup
“PTZ” means Pan/Tilt/Zoom, by PTZ control, camera could move and zoom as you demand. In this part
you should set PTZ parameters if your camera supports PTZ.
Figure 3-23 PTZ setting
About PTZ address: PTZ device has dial switch, ON means 1, OFF means 0, whole 8 digits determine
PTZ address.
3.8.2 RS-485 Setup
In this part you could set RS485 parameters, RS485 used to connect PTZ of camera.