Yaskawa GPD505/P5 - Manual (Page 12)

Installation Chapter 2
8
TM.IW.01
2-3 Connecting the PC to the Inverter
!
! ! ! InverterWin     Connection to Inverter Products
InverterWin
 may be used with the following YASKAWA ELECTRIC AMERICA inverter
products.
•
GPD505/P5
•
GPD506/P5
•
GPD506/P5 600V
•
PC5
This software will not work with inverters provided by other manufacturers. It may not work
with YASKAWA ELECTRIC AMERICA inverters manufactured prior to 1998.
!
! ! !Connecting InverterWin     Software on PC to Inverter
The following paragraph describes how to connect your Yaskawa drive to your PC
1. Remove the operator keypad on the front cover of the drive.
2. Connect cable P/N UWR00103-1 (see Fig 2.1) to the connector for the drive keypad (1CN). Be
careful of the small 12 pin connect as it is keyed (2 ridges on 1 side match the two slots on the
right hand side of the connector.
3. Connect the 9 pin D-sub-miniature to the PC serial port.
Figure 2.1: Inverter Cable P/N UWR00103-1
PC / laptop connection
Inverter connection