Yaskawa PG-X2G5 - Manual (Page 11)

YASKAWA ELECTRIC TOBP C730600 23C 1000-Series Option SI-P3/V, SI-P3/T Installation Manual 11
3 Receiving
3 Receiving
Please perform the following tasks after receiving the PROFIBUS-DP Option:
• Inspect the PROFIBUS-DP Option for damage.
If the PROFIBUS-DP Option appears damaged upon receipt, contact the shipper
immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see
Figure 2 ).
• If you receive the wrong model or the PROFIBUS-DP Option does not function properly,
contact your supplier.
◆
Contents and Packaging
Table 2 Contents of Package
◆
Tool Requirements
Note: Tools required to prepare PROFIBUS cables for wiring are not listed in this manual.
Description: Option Unit Ground Cables Warning Labels
Installation
Manual
(This book)
_
Quantity: 1 4 1 1
A Phillips screwdriver (M3, M3.5 to M6 <1> ) metric or (#1, #2 <1> ) U.S. standard size is required to install the
PROFIBUS-DP Option.
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
MANUAL