Epson Past Ethernet Combo Print Server PS-1216U - Manual (Page 15)

11
11. Please set the network settings for the Print Server manually. By default, the
network settings are as follows.
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
If you have selected “DHCP”, the Print Server will try to determine the network
settings automatically. If a DHCP Server is present within the network, the Print
Server will automatically obtain and configure the network settings assigned by the
DHCP Server. The assigned IP Address will be shown in the IP Address fields.
Or, if no DHCP Server is present within the network, then there is a message will
display as below:
Please assign the network settings of the Print Server manually. Please click “Next”
once you have found appropriate network settings for the Print Server.