beautypg.com

7 sending data to the inverter, Sending data to the inverter – SMA WINDY BOY User Manual

Page 18

background image

Sending data to the inverter

SMA Solar Technology AG

18

WBSetup-BEN100411

User Manual

7 Sending data to the inverter

As soon as you have set the power curve optimally, you can send the settings to the inverter. For this,
the inverter must be in operation and detected by the software.
To send the data to the inverter, proceed as follows:

1. Select [Transfer].

☑ The log-in window opens.

2. Enter the installer password in the "Password" field.
3. Select [OK].

☑ Data is sent to the inverter. The inverter takes the setting on after it has been disconnected from

the grid once and turned back on again.

Installer password
Please contact the SMA Solar Technology Serviceline if you have any questions
concerning the installer password (see 9 ”Contact” (page 20)).

See also other documents in the category SMA Equipment: