SMA SC 250U Installation - Manual (Page 14)

Removal of the components SMA America, LLC
14 SC250U_GFDI-IUS101711 Installation Guide
A flexible busbar 10 x 32 x 1 connects the contactor K2
and busbar WL‒.
1. Remove the 2 screws of the flexible busbar.
2. Remove the flexible busbar.
The flexible busbar will be reused later.
☑ The flexible busbar between contactor K2 and busbar WL- is removed.
4.4 Remove the cable from the GFDI fuse
1. Remove the screw that attaches the cable from the
GFDI fuse to busbar WL‒.
☑ The cable from the GFDI fuse is removed.