SMA SC 250U Installation - Manual (Page 13)

SMA America, LLC Removal of the components
Installation Guide SC250U_GFDI-IUS101711 13
4.2 Remove transparent cover
In order to reach the busbars, remove the transparent cover.
1. Remove all screws of the transparent cover.
2. Remove the transparent cover.
3. Put the screws and the transparent cover aside.
The transparent cover and the screws will be reused
later.
☑ The transparent cover is removed.
4.3 Remove flexible busbars
Between contactor K2 and busbar WL+ is a flexible
busbar 10 x 32 x 1.
1. Remove the 2 screws of the flexible busbar.
2. Remove the flexible busbar.
3. Put the flexible busbar aside. The flexible busbar
will not be reused.
☑ The flexible busbar between the contactor K2 and busbar WL+ is removed.