SMA BLUETOOTH REPEATER OUTDOOR - Manual (Page 27)

SMA Solar Technology AG 10 Troubleshooting
Installation Manual BTREPOUT-IA-en-11 27
10 Troubleshooting
10.1 Voltage Supply
10.1.1 LED RDY
The LED RDY is only visible when the enclosure lid is open.
• In order to open the enclosure lid loosen the four enclosure lid screws.
Status Meaning Measure
permanently
glowing green The supply voltage is good.
Bluetooth Repeater Outdoor is
in operation. None
flashes green
and all other
LEDs are
switched off. Power supply is marginal.
Bluetooth Repeater Outdoor is
in operation. If you are using the top-hat rail power
supply unit:
• Contact the SMA Service Line.
If you are using the Power Module:
• If you are using the cable included in the
delivery:
– Contact the SMA Service Line.
• If you are using a different cable:
– Improve the power supply via one of
the following measures:
– Shorten the cable.
– Choose a larger cable cross-section.
flashes green
and all other
LEDs are
flashing The Bluetooth Repeater
Outdoor firmware is defective. • Contact the SMA Service Line.