SMA BLUETOOTH REPEATER OUTDOOR - Manual (Page 15)

SMA Solar Technology AG 5 Assembly
Installation Manual BTREPOUT-IA-en-11 15
5 Assembly
5.1 Selecting the Mounting Location
Requirements for the mounting location:
☐ If the top-hat rail power supply is used, the mounting location must be in the vicinity of a
socket-outlet in the interior area.
☐ The mounting location must be protected against dust, moisture and corrosive substances.
Observe the maximum cable length:
☐ If a Power Module is used, observe the maximum cable length of 10 m for the voltage supply
cable.
Observe minimum clearances:
Figure 8: Minimum clearances to be observed
• Observe the minimum clearance to walls and other devices or objects.
• Observe the minimum clearance of 1 m to devices using the 2.4 GHz frequency band, e. g.
WLAN devices or microwave ovens. This is to prevent any reduction in connection quality or
data transmission speed.