SMA BLUETOOTH REPEATER OUTDOOR - Manual (Page 18)

5 Assembly SMA Solar Technology AG
18 BTREPOUT-IA-en-11 Installation Manual
5.2 Mounting the Bluetooth Repeater Outdoor on the Wall
Requirement:
☐ Bluetooth Repeater Outdoor must be disconnected.
1. Loosen the screws of the enclosure lid and remove the lid.
2. Drill holes through the indentation in the enclosure
edges. Use a drill bit (4 mm) for this purpose.
3. Mark the holes with the help of the pre-drilled holes
in the enclosure on the wall.
4. Drill the holes at the marked positions.
5. Attach the Bluetooth Repeater Outdoor to the wall using wall plugs and screws
6. Remove the seals from the inside of the enclosure lid
and press them onto screws.
7. Reattach the enclosure lid using the enclosure lid screws.