SMA BLUETOOTH REPEATER - Manual (Page 15)

SMA Solar Technology AG Mounting
Installation Manual BTREPIN-IA-IEN100211 15
5. Plug the SMA Bluetooth Repeater from the top
onto the bracket. Observe the orientation of the
SMA logo on the enclosure.
☑ The SMA Bluetooth Repeater snaps audibly into
place.
5.3 Mounting the SMA Bluetooth Repeater to a top-hat rail
Mounting accessories required:
• 1 Bracket
1. Pull the bracket using the strap and pull it out of the guide rail on the rear side of the
SMA Bluetooth Repeater until only half of the bracket is still locked in place. The bracket slightly
protrudes over the enclosure edge.
2. Hook the SMA Bluetooth Repeater from below
onto the top-hat rail.
3. Push the SMA Bluetooth Repeater upwards onto
the top-hat rail.
4. Push the SMA Bluetooth Repeater downwards.
5. Push the bracket into the guide rail until the bracket
completely snaps into place.
CLICK