beautypg.com

SMA 485 Data Module User Manual

Page 17

background image

SMA Solar Technology AG

5  Connection

Installation Manual

485i-Module-IA-en-18

17

12. Close the spring clamp terminals.
13. Push the cable with the cable shield into the shield connection terminal on the 485 Data

Module.

☑ Two cables are connected to the

485 Data Module.

or

☑ One cable is connected to the

485 Data Module.

14. Fasten the swivel nut on the cable gland hand-tight. This relieves pull strains on the cables.
15. Flip the display down and fasten it hand-tight with the display screw.
16. Close the inverter (see inverter installation manual).
17. Connect the other cable end to the RS485 bus (for information on the terminal assignment and

wiring in the system, see the technical description "RS485 Cabling Plan").

See also other documents in the category SMA Equipment: