SMA BLUETOOTH PIGGY-BACK PLUS - Manual (Page 18)

7 Mounting SMA Solar Technology AG
18 BTPB-Ant-IEN111510 Installation Guide
• For inverters with enclosure type B: pass the
antenna cable along the lower edge of the
inverter enclosure. Pass the antenna cable
towards the antenna connection of the
Bluetooth Piggy-Back in a loop.
• For inverters with enclosure type D: pass the
antenna cable towards the antenna connection
of the Bluetooth Piggy-Back.
7. Screw the antenna cable plug to the antenna
connection by hand without tools.
8. Close the inverter (see inverter installation guide).
9. Screw the antenna onto the antenna cable by hand
without tools.