SMA BLUETOOTH PIGGY-BACK PLUS - Manual (Page 16)

7 Mounting SMA Solar Technology AG
16 BTPB-Ant-IEN111510 Installation Guide
7.3 Connecting the Antenna to the Bluetooth Piggy-Back
Requirement:
☐ You have installed the Bluetooth Piggy-Back in the inverter (see section 7.2).
1. For inverters with enclosure type A and enclosure
type C: press the filler-plug in the middle out of the
enclosure opening.
2. For inverters with enclosure type B and with
enclosure type D: press the left filler-plug out of the
inverter's enclosure opening.
3. Insert the antenna cable with the cable end and the
plug through the enclosure opening into the
inverter.