SMA FANKIT01-10 - Manual (Page 16)

6 Connecting the Fan Retrofit Kit SMA Solar Technology AG
16 FANKIT01-IA-en-12 Installation Manual
8. Insert the cable gland of the fan cable in the
enclosure opening and fasten it to the inside of the
enclosure using the counter nut.
9. After the swivel nut is unscrewed, screw the swivel nut on the cable gland.
10. Fasten the swivel nut hand-tight.
11. Ensure that the fan cable is securely attached.
12. Insert the fan plug in the fan connection of the
controller assembly.
13. If the multi-function relay is to be used on the controller assembly, connect the multi-function relay
via the right-hand cable gland.
• Remove the sealing plug from the right-hand cable gland. For that, unscrew the swivel nut.
• Insert the connection cable through the
right-hand cable gland into the inverter. In doing
so, fasten the swivel nut only hand-tight on the
cable gland.
• Ensure that the connection cable is securely positioned.
Storing the sealing plug
Store the sealing plug in a safe place. The sealing plug is needed again if the fan retrofit
kit is removed.