SMA SB 240-US-10 - Manual (Page 14)

3 Getting Started
SMA America, LLC
14 SPortalMGate-US-BA-en-10 User Manual
3 Getting Started
3.1 Registering Sunny WebBox in Sunny Portal
Requirements:
☐ The PV plant must be commissioned.
☐ The PIC and RID of the Sunny Multigate must be available (see type label or label supplied with
the Sunny Multigate).
Procedure:
• Starting the Plant Setup Assistant in Sunny Portal
• Registering as a new user in Sunny Portal
or
Registering as an existing user in Sunny Portal
• Identifying devices in Sunny Portal
• Configuring module groups
Starting the Plant Setup Assistant in Sunny Portal
The Plant Setup Assistant guides you step-by-step through user registration and the registration of your
plant in Sunny Portal.
1. Go to www.SunnyPortal.com.
2. Select [Plant Setup Assistant].
☑ The Plant Setup Assistant opens.
3. Select [Next].
☑ The User Registration page opens.
Registering as a New User in Sunny Portal
1. Activate the I am not yet registered option and select [Next].
2. Enter the necessary data for registration.
3. Select [Next].
☑ You will receive an e-mail containing a hyperlink and your access data to Sunny Portal after
a few minutes.
✖ You did not receive an e-mail from Sunny Portal?
Possibly, the e-mail was automatically redirected to your spam mail folder.
• Check whether the e-mail was redirected to the spam mail folder.
You may have stated a different e-mail address.
• Check whether the e-mail was sent to another e-mail address.
• If the other e-mail address is an unknown address, restart the Plant Setup Assistant and
register as a new user again.