ShoreLand'r LUV2314SW V.3 - Manual (Page 5)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003808
Page 5 REV C 08/09/2011
is going to be mounted on is up.
Place the inside jack spacer on the winch base so the center pro-
trusion fits down into the indent in the winch base.
Position the jack mounting plate so it is centered around the inside
jack spacer just positioned.
Lay the jack retainer plate on top of the jack mounting plate aligning
the holes in it with the holes in the winch base.
Insert the two 1/2” and 1 1/4” carriage bolts into the holes just
aligned in the jack retainer plate and the winch base. Secure in
place with 1/2” lock washers and hex nuts. Tighten.
Diagram C