ShoreLand'r LIB15 - Manual

®
LIB15
LIRB15 Leisure 1X5 - 1500lbs. Trailer
2 4300184 5.30 X 12-C Tire/MSilver Mod Rim (or)
2 4300206 5.30 X 12-C Tire/Galv Mod Rim
1 62340 Literature Bag - Trailers
1 66620-- Frame Bundle - 1X3 Leisure
1 66625-- Bunk Bundle - Leisure RB1615
Tire Size & Carrying
Capacity Chart
Tire Load Carrying
Size Range Capacity
5.30 X 12 C 1045 lb. per/tire
Refer to tire side wall for proper tire pressure.
Tongue Weight Adjustment
Approximate Tongue Weight for Best Towing.
Tongue weight too high, move the axle assembly forward.
Tongue weight too low, move the axle assembly backward.
Tongue weight should be 5% to 7% of the total gross
weight of the boat and trailer combined.
Final Assembly Instructions
Remove the small parts from the frame by cutting the
bands. Remove the bolt bag and sort all the nuts and bolts
by size.
Axle:
Install the spring busings in the rear spring brackets with 1/
2” X 3-1/4” hex bolt and 1/2” flange lock nuts. Position the
axle under the trailer with the spring eye to the front. Slip
the flat end of the spring in the rear spring bracket and
fasten the front spring eye to the front spring bracket with
9/16” X 3-1/4” hex bolts and 9/16” hex lock nuts. Mount the
tire and rim assemblies with 1/2” lug nuts and tighten to
80-90 ft./lbs. of torque.
Tongue:
Telescope the tongue out and install the tongue cover onto
the tongue frame cap using a 1/2” X 1-1/2” hex bolt.
Secure with a 1/2” flat washer and 1/2” hex nut. Secure the
tongue into the side frame tongue cap using a 1/2” X 4”
hex bolt and 1/2” flange lock nut.
Tongue Wires:
Install the tongue wire harness through the top forward
wire hole and exit the rear of the tongue channel on the
frame. Install the grommets and plug the tongue wire into
the frame harness by color codes.