ShoreLand'r PS6X12 V.1 - Manual (Page 3)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003905
Page 3 REV B 09/23/2008
SPRINGS
Refer to Diagram C for placement.
Mount the spring to the axle assembly using two 1/2” X 2-5/16”
X 6-1/2” square u-bolts over the spring clamp and spring. Secure
the spring to the axle assembly using a spring plate and four 1/2”
flange lock nuts. Repeat on opposite side of the axle assembly.
Install the spring bracket bushings and the 9/16” X 3-1/4” hex bolts
into the rear of the spring bracket (already attached to the frame).
Secure with 9/16” hex nuts. Hook the leaf spring on the axle as-
sembly over the bushing just installed. Repeat this step on the op-
posite side of the axle assembly.
Insert a 9/16” x 3/14” hex bolt in the eye of the leaf spring and se-
cure into the front spring bracket. Repeat on opposite side of the
axle assembly.