ShoreLand'r MC2000-03 V.2 - Manual (Page 8)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003342
REV B 12/07/04
Detail I
See B.O.M.
on Page 3.
Tie Down Brackets
Two additional tie down brackets are provided in the
hardware box. Once the wheel chocks are properly
positioned, place the bike or bikes on the trailer. Determine
the desired location for the tie downs as follows:
One Bike Tie Down Location
If one bike is being transported on the trailer and the tie down
brackets installed with the side panels are not properly located
for your bike, the additional tie down brackets provided can be
positioned anywhere on either the inside row or outside row
of holes provided in the trailer deck for attaching the outside
wheel chocks. Once determined, attach the tie down to the
trailer deck by placing a 3/8” x 1” carriage bolt in the square
hole of the tie down bracket and then inserting it in the de-
termined hole in the deck. Secure using a 3/8” lock washer
and 3/8” hex nut. Rotate the bracket to the desired position
and tighten in place.
Two Bike Tie Down Location
If two bikes are going to be transported on the trailer the tie
downs can be positioned anywhere in the holes provided for
attaching the wheel chock in the center location. Identify the
holes that will best adapt to each individual bike. Note that
they may each have their own location forward or backward.
Once determined, attach the tie down to the trailer deck by
placing a 3/8” x 1” carriage bolt in the square hole of the tie
down bracket and then inserting it in the determined hole in
the deck. Secure using a 3/8” lock washer and 3/8” hex nut.
Rotate the brackets to the desired position and tighten in place.
The two bike tie down system would incorporate the two
tie downs installed with the side shields as well. These tie
downs can be moved to another bolt that attaches the side
shields to the trailer frame if they are in the wrong location
for your bike.
Cleaning
The trailer can be washed with warm soap and water to re-
move dirt and road film. A standard automotive wax can be
used to protect the painted parts of the trailer.
NEVER clean the aluminum parts on the trailer with Windex
or other harsh cleaners like Orange Clean. They will damage
the finish on the aluminum parts. To clean use an aluminum
cleaner that can be purchased at a local auto parts store or
else the automotive section in your larger chain stores.