ShoreLand'r SLXR40TBBLW V.1 - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003456
Page REV A 10/18/06
WINCH POST ASSEMBLY
The height that the bow eye is placed in your boat will
determine the length winch post required. Once this is
determined, attach the winch base to the tongue with
three 1/2” x 4-1/2” carriage bolts and lock nuts.
Align the holes in the Profile 2000 mounting channel
with the holes in the
top of the winch base. Attach the front of the winch
head mounting channel to
the base by placing a 1/2” x 4-1/2” hex
bolt through the hole closest to the front of the winch
base. Secure with a lock nut. Do not tighten.
Note that the winch head can now be rotated either
up or down.
Identify the correct hole combination to use to posi-
tion the bow eye roller just above the bow eye of your
boat. When
determined, secure in this position by placing the bush-
ing as shown in Diagram C inside the winch base so it
aligns with the hole just identified for the proper adjust-
ment. Insert another 1/2” x 4-1/2” hex bolt through the
determined mounting hole in the mounting channel
and winch base making sure the bolt passes through
the bushing as well. Secure with a 1/2” lock nut.
Tighten all bolts.