ShoreLand'r SLXR40TBBLW V.1 - Manual (Page 12)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003456
Page 12 REV A 10/18/06
XR SERIES
The R-series roller rack is installed by placing the
roller arm assembly mounting channel over the rear
cross member and securing in place with a 1/2” x 4-
1/2” hex bolt and lock nut. (See Diagram A). Note that
it should be left loose until the boat is placed on the
trailer. Once the proper positions is determined, it may
be tightened. Repeat on the other roller arm assem-
bly.
The short stabilizer bunk is installed to the adjustable
bunk bracket on the front cross member with a 3/8” x
1” hex bolt and lock nut. (See Diagram A).