ShoreLand'r SLV24LW - Manual (Page 6)

Place one of the spring bushings (Ref.#35) into the rear of
the spring bracket (Ref.#4) and secure with a 9/16” X 3-1/
4” hex bolt (Ref.#6) and 9/16” hex lock nut (Ref.#17).
Repeat on the other side. Position the axle (Ref.#3) under
the frame, then hook the spring loop around the bushing
just installed. Raise the axle assembly up so the front of
the springs (Ref.#31) line up with the front spring bracket
hole. Insert the other two (2) 9/16” X 3-1/4” hex bolts and
9/16” hex lock nuts. Tighten all nuts and bolts, but do not
over tighten. Allow the spring room enough to move.
Mount the tires and rim assemblies (Ref.#23) using 80-90
ft. lbs. tongue on lug nuts (Ref.#14) using proper tightening
procedures.
Tire Size & Carrying Capacity Chart
Tire Load Carrying
Size Range Capacity
ST185/80R13 C 1480 lbs. per/tire
Refer to the tire side wall for the correct tire pressure.