ShoreLand'r SLR10TS User Manual
Page 5
WINCH POST ASSEMBLY
The winch post assembly is pre-assembled and is
shipped banded to the frame. See Diagram C. Place the
winch post on the tongue in the approximate location.
Attach to the tongue using three (3) 3/8” x 4” hex bolts
and 3/8” flange lock nuts. It can be left loose until the
boat is placed on the trailer for final adjustment.
Place the winch handle on the drive shaft of the winch by
mating the flat sides of the drive shaft with the punched
hole in the winch handle. Secure the handle to the drive
shaft with the 1/2” lock nut provided. Tighten
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
www.shorelandr.com
0003276
Page
5
of
9
Rev
B
4/15/2011