ShoreLand'r SL60TAL - Manual (Page 12)

Front Bunk Assembly
Mount the front bunk support weldments to the
pivot weldments by placing them in the channel
of the pivot weldments and attaching with 1/2” x
4 -1/2” hex bolts and lock nuts. See Detail M. Place
the bunk assembly over the support weldment,
align the holes of the bunk brackets with the holes
in the support weldment and secure using 1/2” x
1-1/2” carriage bolts and lock nuts. Tighten but do
not over tighten because the bunks must rotate to
conform to the boat bottom.
Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 www.shorelandr.com M303145
Page 12
Detail N
Detail M