ShoreLand'r SL60TAL - Manual (Page 10)

Mount the winch post assembly to the tongue at a
location that best fits your watercraft. Secure the
winch post base weldment (Ref#2) to the tongue
using two (2) 1/2” X 3-9/16” X 5” square U-bolts
(Ref#11) and four (4) 1/2” stainless steel hex lock
nuts with nylon inserts. Mount the winch post angle
tube weldment (Ref#3) on the tongue tube at a
height that would best fit your watercraft using a
1/2” X 3-9/16” X 5” square U-bolt over the flange
as shown in the drawing. Place the legs of the
U-bolt into the clamp (Ref#21) and secure with two
(2) 1/2” stainless steel hex lock nuts with nylon
inserts.
Winch Post:
Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 www.shorelandr.com M303145
Page 10
Diagram P
Winch Post Assembly