ShoreLand'r SL23AL - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 www.shorelandr.com M303185
Page 7
R Series
Place the roller arm assembly mounting channel
over the rear cross member and secure with a 1/2”
x 4-1/4” hex bolt and lock nut. (See Detail I).
Repeat on the other roller arm assembly.The roller
arm asssembly should be left loose until the boat is
placed on the trailer for adjustment. Once the
position is determined, tighten.
The short stabilizer bunk is installed to the
adjustable bunk bracket on the front cross
member with a 3/8” x 1” hex bolt and lock nut.
(See Detail O).
See Page 16 for final adjustments.