ShoreLand'r SLB18LN V.2 - Manual (Page 5)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003693
Page 5 11/02/06
WINCH POST
Place the winch post assembly on the tongue and secure
with three 3/8” X 4” hex bolts and hex flange lock nuts.
Place the nuts on the bolts but do not tighten because they
will have to be readjusted once the boat is on the trailer.
Remove the winch handle nut from the shaft. Align the hole in the
winch handle with the flat surfaces on the shaft. Slide in position and
secure with the nut just removed. Tighten.