ShoreLand'r SL46TBAL - Manual (Page 11)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003629
Page 11 3/09/06
RB SERIES
Locate the two 2 x 6 bunk assemblies. The bunk mount-
ing brackets on the bunk assemblies are mounted at
the factory. Place a bunk support pivot on one end of
the bunk support tube and align the holes. Repeat
on the other end. Lower the assembly on the bunk
support pivots just installed so the U-bolts align and
go through the holes in the bunk support pivots.
Secure by placing first a spacer bushing on the U-
bolt leg and then a 1/2” hex lock nut. Tighten. Re-
peat on the other end of the arm. (See Detail S)
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Detail R and Page 10.)