ShoreLand'r SL30BAL - Manual (Page 2)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003627
Page 2 3/08/06
Bunk Assembly (B-Series) - Assemble after the axles and tires are assembled.
The 2 x 6 bunk assemblies with mounting brackets are factory assembled. Place the end of the bunk with
the two brackets on the equiload bunk arm. Secure with a 3/8” x 1” hex bolt and lock nuts through the brack-
ets on the bunk and the ear on each end of the equiload arm. Repeat on the other end of the arm. (See Detail I.)
Place the other end of the bunk in the bracket and adjustable bracket mounted on the front cross member. (The
adjustable bracket is adjustable in height.) Once the proper position for the rear cross member is determined,
the front of the bunk attaches to the bracket using two No. 10 x 1-1/4” self tapping screws as shown in Detail H.
The 3/8” bolts can be tightened, do not over tighten. The bunks should be allowed to rotate slightly to conform to the boat
bottom.