ShoreLand'r SL23AL - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003626
Page 7 3/07/06
R Series
Place the roller arm assembly mounting channel over the
rear cross member and secure with a 1/2” x 4-1/4” hex bolt
and lock nut. (See Detail I). Repeat on the other roller arm
assembly.The roller arm asssembly should be left loose until
the boat is placed on the trailer for adjustment. Once the
position is determined, tighten.
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Detail O).
See Page 16 for final adjustments.