ShoreLand'r SL150T - Manual (Page 5)

REF# PART# DESCRIPTION QTY
1 6019900 AXLE WMENT TRIAXLE ..................... 1
2 0150290 HH 3/8-24 X 1 CS SS GR5 .................... 10
3 0250133 CARR 3/8-16 X 4 SS GR5 ..................... 1
4 0340204 SUB 1/2 X 2 9/16 X 6 1/2 ...................... 4
5 1310191 TONGUE WASHER 1 3/4OD X 1ID ...... 2
6 1410359 HEX NUT SLOTTED 1-14 PLAIN .......... 2
7 1450099 HEX LOCKNUT NYLON 3/8-16 SS ....... 1
8 1450357 HEX LOCKNUT NYLON 1/2-13 SS ....... 8
9 1450361 HEX LOCKNUT NYLON 3/8-24 SS ....... 10
10 1540038 COTTER KEY 1/8 X 1 1/2 ..................... 2
- 2500011 GREASE OVERBASED CAL SULF ...... 1
11 3510132 AXLE PAD 12IN BLK ............................ 1
Axle Material List
Chassis Assembly Instructions
Rocker Bushings:
Install the 3/4” ID X 1” OD X 1-1/2” bronze bushings into the inside
the rocker matching the middle and rear hole patterns. The
middle rocker bushing must be secured with a 3/4” X 5-1/2”
stainless steel hex bolt through the rocker, bushing and the middle
shackle on the spring bracket. Tighten using a 3/4” stainless steel
hex lock nut with nylon insert. The rear rocker bushing must be
secured with a 9/16” X 3-3/4” hex bolt and 9/16” stainless steel
hex lock nut with nylon insert. Repeat this procedure on the other
rocker on the opposite side of the trailer.
Spring Bracket Bushings:
Install the spring bracket bushing into the spring support channel.
This assembly is then inserted into the rear spring bracket shackle
and secured with a 9/16” X 4-1/2” hex bolt and 9/16” stainless
steel hex lock nut with nylon insert. Repeat this procedure on the
other spring bracket on the opposite side of the trailer.
Axle:
For installation of the front axle: From the outside-in, insert a 9/
16” X 3-3/4” hex bolt through the spring bracket and the eye of the
spring and secure with a 9/16” stainless steel hex lock nut with
nylon insert. Raise the rear of the axle and insert the hook end of
the spring into the rocker box and secure with a 9/16” X 3-3/4” hex
bolt under the spring and tighten with a 9/16” stainless steel hex
lock nut with nylon insert.
For installation of the middle axle: Fromteh outside in insert 9/
16” X 3-3/4” hex bolt through the rear of the rocker box and the
eye of the spring and secure with a 9/16” stainless steel hex lock
nut with nylon insert. Raise the rear of the axle and insert the hook
end of the spring into the rocker box. Ssecure with a 9/16” X 3-3/4”
hex bolt under the spring. Tighten with a 9/16” stainless steel hex
lock nut with nylon insert.
For installation of the rear axle: From the outside-in, insert a 9/
16” X 3-3/4” hex bolt through the rear of the rocker box and the
eye of the spring and secure with a 9/16” stainless steel hex lock
nut with nylon insert. Raise the rear of the axle and insert the hook
end of the spring into the spring bracket and secure with the
spring support channel under the spring and secure from the
outside-in with a 9/16” X 4-1/2” hex bolt and 9/16” stainless steel
hex lock nut with nylon insert.
Make certain the hook end of the springs point in the same
direction - to the rear of the trailer, on both axles!
Brakes:
Refer to the brake manual for service and maintenance.
Tire/Rim Assemblies:
Mount the tire and rim assemblies onto the drum using 1/2” lug
hex nuts and tighten to 80-90 ft./lbs. of torque.
REF# PART# DESCRIPTION QTY
- 3510164 STUD COVER 1/2ID X 1 1/2 ................. 1
12 4410091 SPINDLE SLEEVE 2 1/4IN ................... 2
13 4410136 SEAL 2 1/8ID ........................................ 2
14 4410166 ROLLER BEARING ............................... 2
15 4410180 ROLLER BEARING 1 3/4 IN ................ 2
16 4410245 BEARING BUDDY TRIAX ................... 2
17 4510073 12 MARINE BRAKE CLUSTER LEFT ... 1
18 4510074 12 MARINE BRAKE CLUSTER RIGHT 1
19 4510080 12 BRAKE DRUM 8 LUG TRI/TANDEM 2
20 4610077 SPRING 5 LEAF SLIPPER ................... 2
21 S-3387 2" PLASTIC CHANNEL BRACKET ....... 1
22 S-4261G 5/16X4X4 SPRING PLATE ZYU ............ 2