ShoreLand'r SK0177 - Manual (Page 2)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003341
12/08/04
Once the latch is installed rotate the ramp into its normal transport
position. Adjust the latch plate up or down so that the latch will
catch the hook of the latch plate and fully engage itself. Once the
location is identified, tighten the bolts securing the latch plate.
Unlatch the latch and raise the ramp, then allow it to drop back into
its transport position. Repeat several times to make sure the latch
plate is adjusted properly.
Once the latch plate is located re-install the taillight assembly re-
moved from the ramp to install the latch.
Locate the Caution decal supplied with the SK0177 kit and attach
it to the side of the ramp as identified in Diagram A. Assembly is
complete.
Diagram B
����������������������������������
��������������������������������������
��������������������������������
������������������������
������� �������