HEIDENHAIN iTNC 530 (606 42x-01) - Manual (Page 574)

574 Manual Operation and Setup
14.1
0
Tilting the W
o
rk
ing Plane (Sof
tw
ar
e Option
1)
Position display in a tilted system
The positions displayed in the status window (ACTL. and NOML.) are
referenced to the tilted coordinate system.
Limitations on working with the tilting function
„ The probing function for basic rotation is not available if you have
activated the working plane function in the Manual Operation mode.
„ The actual-position-capture function is not allowed if the tilted
working plane function is active.
„ PLC positioning (determined by the machine tool builder) is not
possible.