HEIDENHAIN CNC Pilot 4290 Instructions for engraving cycles - Manual (Page 9)

August 2005 Engraving 7
Character string “DIN PLUS, TURN
PLUS”
The character string “DIN PLUS” is engraved linearly
at an angle of +30°, and “TURN PLUS” at –30°.
Programming the character string:
8 Position the tool to XK = –33, YK = –10
8 Parameters for subprogram call:
„ Letter height (LA): 6 mm for “DIN PLUS”, 5 mm
for “TURN PLUS”
„ Angle (LB): 30° for “DIN PLUS”, –30° for “TURN
PLUS”
„ Milling depth to Z=0 (LC=0)
„ Retraction plane to Z=3 (LD=3)
„ Engraving on the front face (LE=0)
„ Linear character string (LF=0)
„ Separation factor: 1.8 * default separation (I=1.8)
Example: Program and block structure
. . .
N58 G100 XK-33 YK10
N59 L"D" V1 LA6 LB30 LC0 LD3 LE0 LF0 I1.8
N60 L"I" V1 LA6 LB30 LC0 LD3 LE0 LF0 I1.8
N61 L"N" V1 LA6 LB30 LC0 LD3 LE0 LF0 I1.8
N62 L"BLANK" V1 LA6 LB30 LC0 LD3 LE0 LF0 I1.8
N63 L"P" V1 LA6 LB30 LC0 LD3 LE0 LF0 I1.8
N64 L"L" V1 LA6 LB30 LC0 LD3 LE0 LF0 I1.8
N65 L"U" V1 LA6 LB30 LC0 LD3 LE0 LF0 I1.8
N66 L"S" V1 LA6 LB30 LC0 LD3 LE0 LF0 I1.8
N67 G100 X55 C90
N68 L"T" V1 LA5 LB-30 LC0 LD3 LE0 LF0 I1.8
N69 L"U" V1 LA5 LB-30 LC0 LD3 LE0 LF0 I1.8
N70 L"R" V1 LA5 LB-30 LC0 LD3 LE0 LF0 I1.8
N71 L"N" V1 LA5 LB-30 LC0 LD3 LE0 LF0 I1.8
N72 L"P" V1 LA5 LB-30 LC0 LD3 LE0 LF0 I1.8
N73 L"L" V1 LA5 LB-30 LC0 LD3 LE0 LF0 I1.8
N74 L"U" V1 LA5 LB-30 LC0 LD3 LE0 LF0 I1.8
N75 L"S" V1 LA5 LB-30 LC0 LD3 LE0 LF0 I1.8
N.. . . .