Euro-Pro INTELLI SEW 9136C - Manual (Page 41)

- Baste the zipper opening on the garment.
- Press open the seam allowance. Place the
zipper face down on the seam allowance
with the teeth against the seam line.
Baste the zipper tape.
- Attach the zipper foot. Attach the right
side of the presser foot pin to the holder
when sewing the left side of the zipper.
- Attach the left side of the presser foot pin
to the presser foot holder when sewing
the right side of the zipper.
- Stitch left side of the zipper from top to
bottom.
- Stitch across the lower end and right side
of zipper. Remove the basting and press.
I
Inserting a centered zipper
Attention:
Zipper foot should be used for sewing width
center needle position straight stitch only. It
is possible that needle could hit the presser
foot and break when sewing other patterns.
2 inch
3.5 1.5~3.0
ZIPPER INSERTION
39
03