Euro-Pro INTELLI SEW 9136C - Manual (Page 18)

6
5
7
8
Please Note:
It is important to carry out the threading correctly as by not
doing so several sewing problems could result.
Start by raising the needle to its highest point, and also
raise the presser foot to release the tension discs.
1. Lift up the spool pin. Place the spool of thread on the spool pin
so that the thread comes from the front of the spool, then
place the spool cap at the end of the spool pin.
2. Draw the thread from the spool through the upper thread
guide.
3. Guide the thread around the thread guide pulling the thread
through the pre-tension spring as illustrated.
1
2
3
4
THREADING THE UPPER THREAD
16
02