Euro-Pro INTELLI SEW 9136C - Manual (Page 20)

2. The needle threader automatically turns
to the threading position and the hook
pin passes through the needle eye.
3. Take the thread in front of the needle.
4. Hold the thread loosely and release the
lever slowly. The hook will turn and pass
the thread through the needle eye
forming a loop.
Pull the thread through the needle eye.
Raise the needle to its highest position
and lower the presser foot.
1. Lower the needle threader lever slowly
and draw the thread through the thread
guide as illustrated and then to the right.
USING THE NEEDLE THREADER
Attention:
Turn power switch to the off position ("O").
18
02