Euro-Pro INTELLI SEW 9136C - Manual (Page 21)

1. Hold the upper thread with the left hand.
Turn the handwheel towards you
(counterclockwise) lowering, then raising
the needle.
2. Gently pull on the upper thread to bring
the bobbin thread up through the needle
plate hole. The bobbin thread will come
up in a loop.
3. Pull both threads to the back under the
presser foot.
Raise the presser foot.
Remove the fabric, draw the threads to the
left side of the face cover and cut using the
thread cutter.
The threads are cut at the proper length to
start the next seam.
RAISING UP THE LOWER THREAD
CUTTING THE THREAD
19
02