Euro-Pro INTELLI SEW 9136C - Manual (Page 16)

6. When the bobbin winder spindle is push to the right,
"bobbin winding position", the symbol " " is shown on the
LCD screen.
It will disappear from the LCD screen when the bobbin
winder spindle is push to the left, "sewing position".
7. Hold the thread tail securely in one hand.
8. Press on the foot control to start the sewing machine.
9. After the bobbin has wound a few turns stop the machine
and cut the thread near the hole of the bobbin. Continue
filling the bobbin until it is full.
The motor stops automatically when the bobbin is full.
Stop the machine. Push the bobbin winder spindle to left.
10.Cut the thread and then remove the bobbin.
Please Note:
When the bobbin winder switch is placed on the right, "bobbin
winding position", the machine will not sew and the handwheel
will not turn. To start sewing, push the bobbin winder switch
to the left "sewing position".
Patterns
WINDING THE BOBBIN
14
02