HEIDENHAIN ND 1100 User Manual
Page 57

Quadra-Chek
®
QC200
4-15
Example of assigning hot
keys
Send 2
Send 2
Send 2
Send 2
Send 2
Sends the current X and Y axes data displayed on the DRO screen
to a printer or computer.
NOTE
NOTE
NOTE
NOTE
NOTE
The Extra menu includes functions that send data from all
The Extra menu includes functions that send data from all
The Extra menu includes functions that send data from all
The Extra menu includes functions that send data from all
The Extra menu includes functions that send data from all
axes when the QC100 system includes a Z and/or Q axis.
axes when the QC100 system includes a Z and/or Q axis.
axes when the QC100 system includes a Z and/or Q axis.
axes when the QC100 system includes a Z and/or Q axis.
axes when the QC100 system includes a Z and/or Q axis.
Clear (CL) datums
Clear (CL) datums
Clear (CL) datums
Clear (CL) datums
Clear (CL) datums
Resets all absolute and incremental datums to machine coordi-
nates.
Min Max
Min Max
Min Max
Min Max
Min Max
Configures an axis to accumulate and retain minimum and maxi-
mum measured values until the Finish key is pressed. This is use-
ful for applications such as touch-probe measurements of runout.
Repeat (Rpt) preset
Repeat (Rpt) preset
Repeat (Rpt) preset
Repeat (Rpt) preset
Repeat (Rpt) preset
Resets datums to the last preset values.
MC
MC
MC
MC
MCS
S
S
S
S
Allows the user to clear datums, cross reference marks and re-
establish machine coordinates without cycling the system power.
An example of assigning hot keys is provided below and demon-
strates how to make two different types of hot key assignments
to the numeric keypad. The methods illustrated in this example
can be applied directly to the assignment of Hot Keys to the Unit,
Remote, Foot and Wide keys.
Press the right cursor arrow
right cursor arrow
right cursor arrow
right cursor arrow
right cursor arrow
key
key
key
key
key to select items in the right
portion of the Hot Keys screen
and press the Unit softkey
Unit softkey
Unit softkey
Unit softkey
Unit softkey at
the bottom of the LCD if neces-
sary.